Pocket Strobe P-2
Pocket Strobe P-2 is a handheld LED stroboscope. An ultra-lightweight stroboscope that is easy to carry around. Optimal for field use and simple inspections. While fully exploiting the advantages of LED, sufficiently short flash duration and large light intensity have been achieved. With a maximum flashing frequency of 360,000 FPM (flashes per minute), it illuminates a wide range uniformly and brightly.
You can intuitively make the illuminated target appear to be stationary by turning the knob left or right to make fine adjustments to flash frequency.
Since no sound is emitted during flashing, it is suitable for use in quiet surroundings.
P-2 illuminates the area of 130×130mm uniformly and brightly from a distance of 300 mm.
Xenon lamp strobes feature instantaneous flash light of high intensity. For example, flash duration of our xenon strobe DS-4AA is as fast as 6 µsec (1/166,000 second) at the flash frequency of 6,000 FPM. A clear still image is obtained even when the object to be observed is moving/rotating at very high speed and/or is very small.
On the other hand, LED strobes emit a large amount of light by adjusting the flash duration. The LED strobe P-2 obtains the same amount of light as DS-4AA with a flash duration of 15 µsec (1/66,000 second), which is fast enough to acquire a clear still image in ordinary rotational speed measurement and observation.
There are two ways to set the flash duration, "Duty cycle setting mode" and "Time setting mode".
Duty cycle setting mode:
Set the duty cycle in the unit of "%" that represents the ratio of the flash duration in the flash cycle (the time from one flash to the next flash). For example, when the flash cycle is 100 µsec and the flash duration is 1µsec, the duty cycle is 1%. Brightness can be adjusted in ten steps from 0.1% to 1% (but up to 500 µsec) in increments of 0.1%.
Since light intensity is constant at the set ratio, brightness of the strobe image is constant even when the flash frequency is increased or decreased. It is suitable for usual rotational speed measurement.
Time setting mode:
Set the flash duration in the unit of "µsec". Accurate Flash duration can be controlled by setting it from 0.1 µsec to 500 µsec (but up to 1% of the flash cycle) in increments of 0.1 µsec.
Since flash duration is constant at the set time, sharpness of the strobe image is constant even when the flash frequency is increased or decreased. It is suitable for observing high-speed moving/rotating objects, or for external trigger flashing.
A silicon cover is available for anti-slip and for protection from external shocks.
Model | P-2 |
---|---|
Flash frequency range | 30-360,000 FPM, Resolution: 0.1 FPM |
Internal trigger accuracy | 30-120,000 FPM: ±0.01% 120,001-240,000 FPM: ±0.0% 240,001-360,000 FPM: ±0.03% |
Flash duration | From 0.1 μsec to the time of 1% of a flash cycle, max 500 μsec |
Battery | Two LR6 (AA) batteries (sold separately) Battery Life: 2 hours (at 6,000 FPM and Duty Cycle 1.0%, Typical) |
Power consumption | 2 W or less |
Usage environment | Temperatures: 0℃–+40℃ Humidity: 20%–90%RH, without dew condensation |
Weight | 220 g |
Dimensions | L 135×W 76×H 39(mm) |
Optional Accessories | Silicon Cover |